PHOTOSHOP LAB REPORT :: essays research papers

1.) Objective of the lab: Â Â Â Â Â The target of this lab was to make a halftone negative of a little clipart. 2.) Facilities, supplies and hardware utilized: Â Â Â Â Â We did this in the photograph lab and in obscurity room. To finish this lab we expected to have a working information on the camera, engineer, fix and a circle. 3.) Techniques utilized: Â Â Â Â Â To make film of a clipart a few stages must be taken. First is to turn the duplicate board to be corresponding to the floor. At that point the glass front must be opened and lifted. The workmanship is then positioned in the focal point of the board close to a dark scale. Subsequent to closing and bolting the glass front the duplicate board is then gone to be upstanding confronting the screen of the camera. The opening ought to be set at a F-stop of 22 at %100. The following stage happens in obscurity room on the opposite side of the procedure camera. You should situate the straightforward plate to be secured front of the screen. You at that point press the test catch or change to check the arrangement of the workmanship on the duplicate board. At the point when adjusted you open the straightforward plate and utilize the vacuum to hold the film in position on the strong plate. You at that point close the strong plate and press the catch that controls the clock for the s hade. This opens the film to the light from the clipart and the dark scale. At the point when the screen closes you expel the film by killing the vacuum. At that point place the film in the engineer until you can see the level 4 on the dark scale. This is the ideal advancement of the film. When there you place the film in the stop arrangement. Following a moment or so in there you place the film in the fix. This expels all the staying silver from the film.